{"id":974,"date":"2015-01-17T12:13:56","date_gmt":"2015-01-17T19:13:56","guid":{"rendered":"http:\/\/canadiangeek.net\/?p=974"},"modified":"2015-01-20T12:25:38","modified_gmt":"2015-01-20T19:25:38","slug":"daily-update","status":"publish","type":"post","link":"https:\/\/canadiangeek.net\/?p=974","title":{"rendered":"Daily Update"},"content":{"rendered":"

So today started off with a quick trip to the dump, a little more room to move around in the garage now but i could stand to take another trip.<\/p>\n

After i got back the kids and i hit the garage to start cleaning suspension parts. A little heat (blow torch), a 4 foot breaker bar, 2 impact guns and a few wrenches and its 80% apart. I know i own a pickle fork but for the life of me I cant find it. A few of the more stubborn arms wouldn't come out with the dead-blow hammer. Tomorrow I will pick up a new pickle fork and a 34mm socket to get these axel nuts off.<\/p>\n

Once apart i filled a large Rubbermaid container with degreaser and warm water and put the kids to work. Nothing like a little child labor to start the afternoon. 4 hours of scrubbing with SOS pads and a wire brush resulted in 4 A arms that look like new.<\/p>\n

Now I know some people paint these after cleaning them, but why?
\nAfter using the wire brush they look like new.
\nDoes paint clean easier in the future?
\nseems like it might just flake off, rock chips and then look worse.<\/p>\n

Tomorrow will be more of the same, lots of arms and spindles to clean.<\/p>\n

I was also reading about using a 12 volt battery charger, some re-bar and a few chemicals to remove rust from parts. I was considering putting the wheel bearing assemblies in that solution to remove the surface rust. I could then throw a coat of black paint on those to prevent future rust.
\nhttp:\/\/makezine.com\/projects\/electrolysis-rust-remover\/<\/a><\/p>\n

Pictures or it didn't happen \ud83d\ude42
\n\"Click<\/a>\"Click<\/a>\"Click<\/a>\"Click<\/a>\"Click<\/a>\"Click<\/a>\"Click<\/a>\"Click<\/a>\"Click<\/a>\"Click<\/a><\/p>\n

All of the rubber and seals look good except for the ones on the calipers and the one on the rods for the rear suspension. Looks like i might have to replace those.<\/p>\n ","protected":false},"excerpt":{"rendered":"

So today started off with a quick trip to the dump, a little more room to move around in the garage now but i could stand to take another trip. After i got back the kids and i hit the garage to start cleaning suspension parts. A little heat (blow torch), a 4 foot breaker […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[15,10,13],"tags":[],"class_list":["post-974","post","type-post","status-publish","format-standard","hentry","category-gtm_all","category-gtm_donor","category-gtm_suspension"],"_links":{"self":[{"href":"https:\/\/canadiangeek.net\/index.php?rest_route=\/wp\/v2\/posts\/974","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/canadiangeek.net\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/canadiangeek.net\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/canadiangeek.net\/index.php?rest_route=\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/canadiangeek.net\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=974"}],"version-history":[{"count":1,"href":"https:\/\/canadiangeek.net\/index.php?rest_route=\/wp\/v2\/posts\/974\/revisions"}],"predecessor-version":[{"id":975,"href":"https:\/\/canadiangeek.net\/index.php?rest_route=\/wp\/v2\/posts\/974\/revisions\/975"}],"wp:attachment":[{"href":"https:\/\/canadiangeek.net\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=974"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/canadiangeek.net\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=974"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/canadiangeek.net\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=974"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}