- \n
- ensors removed and replaced with FF units as per instructions.<\/li>\n<\/ul>\n
<\/a>
<\/a><\/p>\n
Day two<\/p>\n
- \n
- alternator bolted on<\/li>\n
- Air-cond pump bolted on<\/li>\n
- Tensioner setup<\/li>\n
- Serpentine belts put on<\/li>\n
- Removed the engine from its stand and placed onto crane<\/li>\n
- bolted the engine mounts back on<\/li>\n
- Put the block heater back in (got in the way of the stand)<\/li>\n
- covered the inside of the engine bay with blankets<\/li>\n
- tried to fit the engine in.<\/li>\n
- realized that the manual was right and the thermostat does have to come off to fit.<\/li>\n
- removed thermostat, tried again<\/li>\n
- bolted engine in, held back end up with ratchet strap<\/li>\n
- bolted the starter ring and flywheel on.<\/li>\n
- put the bearing onto the flywheel<\/li>\n
- put the trans\/engine adapter plate on, (realized i only had one bolt that would work)<\/li>\n
- Went to the store to buy more bolts.<\/li>\n
- bolted the adapter on.<\/li>\n
- bolted the clutch on<\/li>\n
- installed the clutch slave onto the trans<\/li>\n
- installed the pilot bearing, etc. onto the trans.<\/li>\n
- identified and purchased the bolts required to mount the trans....<\/li>\n
- .... ran out of time.<\/li>\n<\/ul>\n
<\/a>
<\/a>
<\/a><\/p>\n
My wife is out tomorrow evening so i should have enough time to mount the trans to the engine and the rear support.<\/li>\n<\/ul>\n ","protected":false},"excerpt":{"rendered":"
So day one started with me going to work because something went wrong and i was on call so i didnt get quite as far as i wanted. Day One Garage Cleaned up All Bolts tightened to spec. Steering wheel mounted Pushed the car down the driveway, spun around and placed onto the lift with […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[15,1],"tags":[],"class_list":["post-1115","post","type-post","status-publish","format-standard","hentry","category-gtm_all","category-uncategorized"],"_links":{"self":[{"href":"https:\/\/canadiangeek.net\/index.php?rest_route=\/wp\/v2\/posts\/1115","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/canadiangeek.net\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/canadiangeek.net\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/canadiangeek.net\/index.php?rest_route=\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/canadiangeek.net\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=1115"}],"version-history":[{"count":4,"href":"https:\/\/canadiangeek.net\/index.php?rest_route=\/wp\/v2\/posts\/1115\/revisions"}],"predecessor-version":[{"id":1125,"href":"https:\/\/canadiangeek.net\/index.php?rest_route=\/wp\/v2\/posts\/1115\/revisions\/1125"}],"wp:attachment":[{"href":"https:\/\/canadiangeek.net\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=1115"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/canadiangeek.net\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=1115"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/canadiangeek.net\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=1115"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}